Has your Wi-Fi suddenly dropped and does the light on your Netgear RBR50 stay off? Then you have dead zones in the house again. Often it isn’t the device itself, but the adapter that has given out. This power supply gives your RBR50 the 12V it needs, with plenty of power to spare. Plug it in and your Wi-Fi reaches every room again.
Check the label on your original Netgear adapter. It should read Output: 12V DC ⎓ 5A with a center-positive polarity symbol. The barrel connector measures 5.5 × 2.1/2.5 mm barrel (combi plug). If your adapter shows different values, it is not the right model.
The RBR50 is powered by an external 12V DC adapter (60W). The original Netgear adapter can be replaced by any 12V DC adapter with the same barrel connector, correct polarity and at least the same wattage. The required connector is 5.5 × 2.1/2.5 mm barrel (combi plug), polarity center-positive.
Yes. The device only draws the current it needs. A higher amperage rating is safe. Never use a higher voltage.
This is a compatible replacement adapter that meets or exceeds the original specifications, is CE-certified and tested before shipping. It is not manufactured by Netgear.