Is your internet down and do the lights on your Netgear R7500 stay off, or does it keep restarting? Then you are without internet and Wi-Fi. Often it isn’t the router itself, but the adapter that no longer delivers enough power. This power supply gives your R7500 the 12V it needs, with plenty of power to spare. Plug it in and as soon as it has booted, your internet and Wi-Fi are back.
Check the label on your original Netgear adapter. It should read Output: 12V DC ⎓ 5A with a center-positive polarity symbol. The barrel connector measures 5.5 × 2.1/2.5 mm barrel (combi plug). If your adapter shows different values, it is not the right model.
The R7500 is powered by an external 12V DC adapter (60W). The original Netgear adapter can be replaced by any 12V DC adapter with the same barrel connector, correct polarity and at least the same wattage. The required connector is 5.5 × 2.1/2.5 mm barrel (combi plug), polarity center-positive.
Yes. The device only draws the current it needs. A higher amperage rating is safe. Never use a higher voltage.
This is a compatible replacement adapter that meets or exceeds the original specifications, is CE-certified and tested before shipping. It is not manufactured by Netgear.