Has your home network suddenly dropped and do the lights on your Netgear GS110EMX stay off? Then the computer, TV or printer behind that switch has no connection anymore. Often it isn’t the switch itself, but the adapter that has given out. This power supply gives your GS110EMX the 12V and 2.5A (30W) it needs again. Plug it in and your network works again right away.
Check the label on your original Netgear adapter. It should read Output: 12V DC ⎓ 2.5A with a center-positive polarity symbol. The barrel connector measures 5.5 × 2.1/2.5 mm barrel (combi plug). If your adapter shows different values, it is not the right model.
The GS110EMX is powered by an external 12V DC adapter (30W). The original Netgear adapter can be replaced by any 12V DC adapter with the same barrel connector, correct polarity and at least the same wattage. The required connector is 5.5 × 2.1/2.5 mm barrel (combi plug), polarity center-positive.
Yes. The device only draws the current it needs. A higher amperage rating is safe. Never use a higher voltage.
This is a compatible replacement adapter that meets or exceeds the original specifications, is CE-certified and tested before shipping. It is not manufactured by Netgear.