Comparable D-Link power supplies
This power supply 
DIR-882 power supply €19,95
Voltage12V DC
Wattage30W
Product information
Highlights
- +1.5 m cable from wall socket to router
- +2-pin Europlug: fits every Belgian and Dutch wall socket
Description
Is your internet down and do the lights on your D-Link DIR-882 stay off, or does it keep restarting? Then you are without internet and Wi-Fi. Often it isn’t the router itself, but the adapter that no longer delivers enough power. This power supply gives your DIR-882 the 12V and 2.5A (30W) it needs again. Plug it in and as soon as it has booted, your internet and Wi-Fi are back.
Key specifications
- Suitable for
- D-Link DIR-882 EXO AC2600 MU-MIMO Router (DIR-882), D-Link DIR-825 Xtreme N Dual Band Gigabit Router (DIR-825), D-Link DIR-842 AC1200 Wi-Fi Gigabit Router (DIR-842), D-Link DIR-878 EXO AC1900 MU-MIMO Router (DIR-878), D-Link DIR-1960 EXO AC1900 Smart Mesh Wi-Fi Router (DIR-1960), D-Link DWR-921 4G LTE Router (DWR-921), D-Link DWR-953 4G LTE Router (DWR-953), D-Link DSL-3782 AC1200 VDSL2/ADSL2+ Modem Router (DSL-3782)
- Replaces
- —
Specifications
- Compatible device
- D-Link DIR-882 EXO AC2600 MU-MIMO Router (DIR-882)
- Output voltage
- 12V DC
- Output current
- 2.5A (30W max)
- Connector
- 5.5 × 2.1/2.5 mm barrel (combi plug)
- Polarity
- Center-positive ⊕
- Input
- 100–240V AC, 50/60Hz
- Plug type
- 2-pin Europlug (type C)
- Cable length
- 1.5 m
- Certification
- CE, RoHS
- SKU
- PSU-AVM-30W
How to verify this is the right power supply
Check the label on your original D-Link adapter. It should read Output: 12V DC ⎓ 2.5A with a center-positive polarity symbol. The barrel connector measures 5.5 × 2.1/2.5 mm barrel (combi plug). If your adapter shows different values, it is not the right model.
Frequently asked questions
Which power supply does the D-Link DIR-882 use?
The DIR-882 is powered by an external 12V DC adapter (30W). The original D-Link adapter can be replaced by any 12V DC adapter with the same barrel connector, correct polarity and at least the same wattage. The required connector is 5.5 × 2.1/2.5 mm barrel (combi plug), polarity center-positive.
Can I use a power supply with a higher amperage rating?
Yes. The device only draws the current it needs. A higher amperage rating is safe. Never use a higher voltage.
Is this an original D-Link power supply?
This is a compatible replacement adapter that meets or exceeds the original specifications, is CE-certified and tested before shipping. It is not manufactured by D-Link.