Comparable D-Link power supplies
This power supply 
DGS-1008D power supply €18,95
Voltage5V DC
Wattage5W
Product information
Highlights
- +90 cm cable from wall socket to switch
- +2-pin Europlug: fits every Belgian and Dutch wall socket
Drawbacks
- −Not suitable for rev G1 (1.2A), C1/F1 (7.5V), B (3A)
- −Not suitable for D-Link PoE switches (they run on 48V to 54V)
Description
Has your home network suddenly dropped and do the lights on your D-Link DGS-1008D stay off? Then the computer, TV or printer behind that switch has no connection anymore. Often it isn’t the switch itself, but the adapter that has given out. This power supply gives your DGS-1008D the 5V and 1A (5W) it needs again. Plug it in and your network works again right away.
Key specifications
- Suitable for
- D-Link DGS-1008D 8-Port Gigabit Desktop Switch (DGS-1008D), D-Link DGS-1005D 5-Port Gigabit Desktop Switch (DGS-1005D)
- Replaces
- CF0605-E (5V 1.2A, rev F/G era) · AM-0751000V (rev C1, 7.5V)
Specifications
- Compatible device
- D-Link DGS-1008D 8-Port Gigabit Desktop Switch (DGS-1008D)
- Output voltage
- 5V DC
- Output current
- 1A (5W max)
- Connector
- 5.5 × 2.1 mm barrel plug
- Polarity
- Center-positive ⊕
- Input
- 100–240V AC, 50/60Hz
- Plug type
- 2-pin Europlug (type C)
- Cable length
- 0.9 m
- Certification
- CE, RoHS
- SKU
- PSU-TPL-5V
How to verify this is the right power supply
Check the label on your original D-Link adapter. It should read Output: 5V DC ⎓ 1A with a center-positive polarity symbol. The barrel connector measures 5.5 × 2.1 mm barrel plug. If your adapter shows different values, it is not the right model.
Frequently asked questions
Which power supply does the D-Link DGS-1008D use?
The DGS-1008D is powered by an external 5V DC adapter (5W). The original D-Link adapter can be replaced by any 5V DC adapter with the same barrel connector, correct polarity and at least the same wattage. The required connector is 5.5 × 2.1 mm barrel plug, polarity center-positive.
Can I use a power supply with a higher amperage rating?
Yes. The device only draws the current it needs. A higher amperage rating is safe. Never use a higher voltage.
Is this an original D-Link power supply?
This is a compatible replacement adapter that meets or exceeds the original specifications, is CE-certified and tested before shipping. It is not manufactured by D-Link.